I need you to paraphrase these paragraphs in to TWO answers( i mean i need two paraphrase to each paragraph)
1-
(HDD)
Cost wise they cost only around $0.075 pergigabyte, very cheap (buying a 4TB model)
Capacity wise Typically 500GB – 2TB fornotebook size drives
Operating system boot time takes around 40 secondsaverage bootup time
File copy / write speed The range can beanywhere from 50 – 120MB / s
Encryption Full Disk Encryption (FDE)Supported on some models
when it comes to power they have more powerdraw, it averages 6 – 7 watts and therefore uses more battery.
Mean time between failure rate of 1.5 millionhours
(SSD)
Cost wise they are expensive, $1.00 pergigabyte (based on buying a 240GB drive)
Capacity Typically not larger than 512GBfor notebook size drives
Operating system boot time takes around 22seconds average bootup time
File copy / write speed generally above 200MB/s and up to 500 MB/s for cutting edge drives
Encryption Full Disk Encryption (FDE)Supported on some models
Power Draw / Battery Life, SSD’s have lesspower draw, averages 2 – 3 watts, resulting in 30+ minute battery boost
Mean time between failure rate of 2.0 millionhours
2- Theboot loader in linux is called GRUB, once it is loaded to memory, it presentsthe user with a graphical screen showing the different operating systems orkernels it has been configured to boot. On this screen a user can use the arrowkeys to choose which operating system or kernel they wish to boot and press[Enter]. If no key is pressed, the boot loader loads the default selectionafter a configurable period of time has passed.]
